Place your brackets where you would like your roller blind to hang, whether that’s inside recess. Be sure to be as accurate as you can to fully accommodate your new blind.
2.
Hold each bracket in place and use a pencil to mark where your screws will go - either outside the window frame (exact) for face fix or on the inside recess for top fix. Be sure to mark the position of both holes in each bracket.
3.
Once you have marked the positions, align the holes in the bracket with your markings. Before you begin mounting, be sure to identify you control end bracket, so you know where your chain will hang.
4.
Take your screws and place them over the hole.
5.
Using your drill, begin to mount one of the brackets to the wall by drilling the screws into the wall, over the screw. Do not fully drill the screw into the wall yet, leaving the bracket slightly loose.
6.
Once your screw is holding your bracket in place, position the other screw over the second hole making sure it sits over the mark you made previously.
7.
Drill your second screw fully into the wall, before going back to the first and completely drilling that too.
8.
Once you have secured your first bracket, repeat the same process on the second.
TOP FIXING
Hold each bracket into place and mark the hole positions. Fit each bracket with suitable screws. Please ensure fixings are suitable for the wall/surface to which you are mounting the brackets. When top fixing into a recess, please allow for any protruding obstructions such as vents or window handles.
face FIXING
Hold each bracket into place and mark the hole positions. Fit each bracket with suitable screws. Please ensure fixings are suitable for the wall/surface to which you are mounting the brackets
1. Place your brackets where you would like your roller blind to hang, whether that’s inside recess. Be sure to be as accurate as you can to fully accommodate your new blind.
2. Hold each bracket in place and use a pencil to mark where your screws will go - either outside the window frame (exact) for face fix or on the inside recess for top fix. Be sure to mark the position of both holes in each bracket.
3. Once you have marked the positions, align the holes in the bracket with your markings. Before you begin mounting, be sure to identify you control end bracket, so you know where your chain will hang.
4. Take your screws and place them over the hole.
5. Using your drill, begin to mount one of the brackets to the wall by drilling the screws into the wall, over the screw. Do not fully drill the screw into the wall yet, leaving the bracket slightly loose.
6. Once your screw is holding your bracket in place, position the other screw over the second hole making sure it sits over the mark you made previously.
7. Drill your second screw fully into the wall, before going back to the first and completely drilling that too.
8. Once you have secured your first bracket, repeat the same process on the second.
TOP FIXING
Hold each bracket into place and mark the hole positions. Fit each bracket with suitable screws. Please ensure fixings are suitable for the wall/surface to which you are mounting the brackets. When top fixing into a recess, please allow for any protruding obstructions such as vents or window handles.
face FIXING
Hold each bracket into place and mark the hole positions. Fit each bracket with suitable screws. Please ensure fixings are suitable for the wall/surface to which you are mounting the brackets.
STEP 2: roller blinds
STEP 3: retaining device
1.
Take your NEW blind and fully wind it up
1.
Find the lowest point of the hanging chain.
STEP 2: roller blinds
1. Take your NEW blind and fully wind it up
2. Identify the idle pin end (the end without the control mechanism and chain) and insert it into the hole on the side of the bracket.
3. Take the control end and connect it with the control bracket by depressing the pin end.
4. Pull down until you hear the control end click firmly into place.
5. Check your new blind is working smoothly by pulling on the chain to fully extend it.
STEP 3: retaining device
1. Find the lowest point of the hanging chain.
2. Hook the chain into the safety device, ensuring it is securely holding the chain in a taut position.
3. Place the screws over the holes and gently drill until they are fully in place and the device is securely attached to the wall.
2.
Identify the idle pin end (the end without the control mechanism and chain) and insert it into the hole on the side of the bracket.
2.
Hook the chain into the safety device, ensuring it is securely holding the chain in a taut position.
3.
Take the control end and connect it with the control bracket by depressing the pin end.
3.
Place the screws over the holes and gently drill until they are fully in place and the device is securely attached to the wall.
4.
5.
Pull down until you hear the control end click firmly into place.
Check your new blind is working smoothly by pulling on the chain to fully extend it.
